Swing small 3in1
This swing is amazing - you have 3 swings in one!
The first version - with a wooden shaft and a front cloth protection
The second version - it is very easy to remove the protective material, pick up a wooden roller and an older child can enter the swing by himself.
The third version - without a wooden roller and a fabric belt - when the children grow up, so that they can sit on the swing by themselves.
The perfect swing for small spaces :)
Our products are unique and created with attention to every detail. We put our whole heart into our work.
The swings are handcrafted from the best quality certified materials.
The swing seat is made of thick and durable linen with a beautiful natural weave. The seat is reinforced with a 10 mm thick wooden plate placed in a special pocket in the seat. The pillow is made of 100% natural linen, decorated with hand-sewn buttons. The filling of the pillow is antiallergic silicone down. The swing is hung on thick cotton ropes fi 16. The swing was made of wooden beech balls and rollers. Wooden elements painted with certified paint.
Internal dimensions of the seat 29 cm / 32 cm (depth), height of the backrest: 20 cm without a pillow, with a pillow 30 cm.
Strength: 50 kg
Rope length: 2.2 m
During use, the ropes can stretch from 5 cm to 25 cm (depending on the weight of the user).
The pillow can be washed by hand or in a washing machine.
Machine wash at 30 degrees. Low spin speed. Do not bleach. Do not tumble dry. Dry flat.
Clean the seat by hand with a white sponge.
Clean the ropes by hand, gently with a white sponge.
The swing should be hung on the appropriate hooks on the ceiling. The swing set includes a set of hooks and expansion bolts.
Hooks should be adapted to the type of ceiling and the load that the swing will bear.
The hooks must be properly adjusted to the thickness of the rope, their end must not rub or touch the rope to prevent abrasions during use.
The seat height is adjustable. Untie the knot on the rope below the wooden rollers, lift the wooden rollers one by one on each rope (the elements on which the seat fabric is hung) and the wooden balls, to the appropriate height and tightly re-tie the knot directly under the wooden roller. Repeat three times on each side. Make sure the seat is at the correct height on all sides.
Note: The use of the swing by children under adult supervision.
In the set with the swing you get a set of two metal hooks and plastic expansion bolts that can be used for both wooden and concrete ceilings.
Metal hooks: 12x160
Plastic wall plugs: 14x70
Drill holes in the ceiling to a depth of 7 cm, the distance between the holes 45 cm. Use a diameter 14 drill to make the drillings.
After drilling the holes, insert the wall plug included in the kit into each hole. You can gently use a hammer to drive the dowel all the way into the hole made in the ceiling.
Then screw the metal hooks into the inserted dowels. When it becomes difficult to screw the hooks in, you can use a screwdriver as shown in the picture below.